I think yarn art is so cool, so I tried it. I made this one for Valentine's Day with subtle pink tassels I found pre-made from the Target Dollar Spot. I used a thick, ivory colored yarn. I also tied in twine to break up the ivory. I really love how it turned out!! Hope you do to!!
Here is what I used...
*Thick Ivory Yarn (Walmart)
*Small Wooden Dowel [cut small] (Lowes)
*Pink (&gold) Tassels (Target)
*White Pom Pom Ribbon (Tj Maxx)
*Cute Furbabe Comfort in a Little T-Shirt
All you want to do is wrap the yarn, twine, and ribbon once around the dowel and tie. I braided some yarn and twine together and also braided yarn with yarn. The pom pom ribbon just was wrapped and tied to the dowel. I really was random with these steps and did not really do any type of pattern. I did cut or lay the yarn (or twine) in such a way to create a "V" for the structure of the Yarn Art Project. (You can do it any way you like if you don't want to re-create this look.)
I randomly tied on the pink tassels to ends of the yarn (sometimes yarn and twine) braids.
This was my finished look.
Twine was wrapped around the dowel then tied on so I can hang this art project.
Happy Tuesday!! It is no secret that I am a huge fan of Rae Dunn Clay. I have many mugs and a few canisters and am always on the look out for new items to add to my collection. My husband thinks I'm crazy...but happy wife, happy life right? I have been in love with the Rae Dunn Planters from the moment I first learned what Rae Dunn was. I never had the luck in finding any and I didn't want to pay the high price tag online from eBay and amazon so I decided to make my own.
I went to hobby lobby and bought three medium sized clay pots for less than $2 ea. and they were on sale!! I grabbed two Lamb's Ear sprays from the floral section and headed to the register. My total was around $7 rounded up. I had white chalk paint already at home and I used an old "kid ruined" small faux dough bowl I found at hobby lobby last spring. I couldn't find any clay bases to use so the dough bowl would have to do and I think it worked out great! The steps in making this are pretty self explanatory. Paint. Draw with a black, fine pointed paint marker- Plant, Grow, Bloom in Rae Dunn inspired font. Let dry. Plant something. (I "planted" something fake for now. Enjoy:)
I searched high and low, Hobby Lobby to Homegoods, for a large wooden tray with no luck at all for one I liked that would work as a bed tray and bath tray. So what happens when I can't find something I like? I make it myself. The best part about this tray is that it is customized to "lock" into our bathtub. It doesn't move and fits snuggly right over top. It's even kid approved!!
If you have the tools to cut wood, this project is a breeze!
Here's what you will need:
1. WOOD. It can be salvaged like mine, new, pallet wood,
barn wood, oak, pine, whatever you find.
You will need wood for the tray itself and the legs.
(TIP: Found wood should be bleached to kill any critters.)
2. A saw. Table saw or chop saw (seen above) works perfectly!
3. Clamp.. to hold the wood steady if you don't have a partner,
and even if you do, it will make the job easier.
4. Stain is optional. I did not use stain because I loved the weathered look
from the salvaged wood I found. You should seal it to protect it from water.
5. White Chalk paint for the "line". (You can use any color you like!)
6. Two handles for the ends of the tray. (I got mine from Hobby Lobby for $2)
7. Screwgun and screws. I used 4 1/2 inch screws for the bottom blocks.
("Legs" that will lock your tray into place for the bathtub)
8. Hand Sander (or sandpaper), Pencil, Ruler, Tape Measure, Paint brush for the line.
After you have your supplies, measure the length of your bathtub's sides. Mine was only 29 inches. This will be the size of your tray. Also measure the length of the tub opening. This will determine where the two small pieces of wood will go so the tray will lock in place. I cut the big wood plank I found in half. I then lined the two halves up against one another, clamped, and measured 29 inches. Once you mark it with the pencil, cut with your saw. The clamp will also help you cut evenly.
Once you made your cut with the planks you will use for your tray, cut two small "blocks" or smaller planks of wood. You will use these for the "legs" which will also hold together your two planks once you screw them in from the bottom of the tray. The size doesn't really matter as long as its big enough to hold the two big wood planks together in place. Make sure you screw the smaller planks or blocks just before the measurement of your tub's opening. Mine opened at 2 1/2 and 25 inches of the full 29 inches. I have a "builder grade" bathtub attached to the "wall". The side by the wall is never as thick as the edge of the tub, so your legs may not be completely centered on the bottom of your tray. But that's ok! It is customized to fit your bathtub, and is how your tray will fit snuggly and lock. After your tray is assembled and sanded, you can stain (if you are using one), screw on your handles, draw on with pencil then paint lines on the end of your tray (use a ruler to determine the thickness of your line). Once everything is dry, (MUST BE COMPLETELY DRY OR PAINT WILL RUN!!) you can spray on a clear adhesive coat that will water proof and seal your tray. Then ENJOY!!:)
I sprinkled a little Valentine's Day Decor...
I DIYed this beautiful sign for our bedroom the other day!
I decided the pillow looked better on the other side ;) & Look at those cuties!!
The kiddos love it and I hope you do too!!
And look how majestic Jack is.. I just had to add this LOL!
P.S. Don't forget to enter the fun giveaway JORD & I partnered up for!! Click Here!!